Art of Smart

Ruckus Zoneflex T710 WiFi 5 | 802.11ac Wave 2 dual-band 360° outdoor wireless AP, 4×4:4 streams

  • INDUSTRY’S HIGHEST PERFORMING 802.11AC WAVE 2 STANDARD
  • BETTER RECEPTION AND MORE CONSISTENT PERFORMANCE
  • REDUCED WI-FI INTERFERENCE
  • IDEAL HIGH-PERFORMANCE OUTDOOR ACCESS POINT

Login to see Prices

SKU: RUC-T710 Category:

The Ruckus T710 combines Ruckus patented technologies and best-in-class industrial grade design with next generation of 802.11ac features to deliver industry-leading Wi-Fi performance, reliability and coverage for challenging high density outdoor deployments. Featuring BeamFlex+ adaptive antenna technology, the T710 offers a substantial increase in performance and range by optimizing antenna coverage on a per client, per transmission basis. BeamFlex+ additionally mitigates co-channel interference by directing Wi-Fi signals where they are needed instead of towards neighboring access points. The T710’s BeamFlex+ adaptive antenna system is also equipped with dual polarization antennas, allowing the access point to adapt to the physical orientation of client devices and maximize uplink performance.

Features

  • 802.11ac 802.11ac Wave 2 Multi-User MIMO (MU-MIMO)
  • Concurrent dual-band (5GHz/2.4GHz) support
  • 2,533Mbps maximum PHY rate (1733 Mbps in 5GHz; 800Mbps in 2.4GHz)
  • BeamFlex+ (PD-MRC) smart antenna, with support for 4,000+ unique antenna patterns enables up to 5dB of additional gain and up to 15dB of additional interference mitigation
  • 802.11ac standard Tx Beamforming
  • Antenna options: omni-directional and 120×30 degrees sector
  • Unmatched Rx sensitivity down to -104dBm
  • Improved Maximum Ratio Combining (MRC) for best-in-class re – ceive sensitivity
  • Space Time Block Coding for increased handset performance
  • Low Density Parity Check (LDPC) for increased data throughput at all ranges
  • 256-QAM support on 5GHz and 2.4GHz
  • Admission control/load balancing*
  • Band balancing
  • Four software QoS queues per client station
  • Up to 16 BSSIDs per radio with unique QoS and security policies*
  • Backward compatible with legacy 802.11 clients
  • Dedicated dual band RF monitor enabling enhanced performance while providing Zero-Wait DFS capability
  • WPA-PSK (AES), 802.1X support for RADIUS and AD* INTERFACES
  • 2 x 1GbE ports

Technical Specification

PHYSICAL CHARACTERISTICS
POWER
  • AC input: 100-250 Vac, 50/60 Hz
  • PoE: 802.3at
PHYSICAL SIZE
  • 31.7 cm (L). 24.1 cm (W). 9.5 cm (H)
WEIGHT
  • 6.5lbs
RF
• Adaptive antenna array: 4,000+ unique antenna patterns,
polarization diversity
• Maximum Transmit Power: 28 dBm on 2.4GHz; 28dBm on 5GHz
• Physical antenna gain: Omni – 3 dBi (2.4 and 5GHz); Sector – 6dBi
(2.4GHz), 8 dBi (5GHz)
• BeamFlex SINR Tx gain: up to 6dB
• BeamFlex SINR Rx gain: up to 3-5dB
• Interference mitigation: up to 15dB
• Minimum Rx sensitivity: -104dBm
ETHERNET PORTS
• 2 Ethernet ports, auto MDX, auto-sensing, 10/100/1000 Mbps, RJ-45
• Power over Ethernet (802.3at) with Category 5/5e/6 cable
• Power over Ethernet (802.3at) Output with Category 5/5e/6 cable
• Link Aggregation (LACP)
• SFP port to support fiber backhaul
ENVIRONMENTAL CONDITIONS
• Operating Temperature:-40°F (-40°C) to 149°F (65°C)
• Operating Humidity: up to 95% non-condensing
POWER CONSUMPTION
• When PoE Out is not used –
• 5.5W (minimum)
• 10.4W (typical)
• 25W peak
                                          PERFORMANCE AND CAPACITY
PHY DATA RATES
  • Up to 800Mbps (2.4GHz)
  • Up to 1733Mbps (5GHz)
CONCURRENT STATIONS
  • Up to 512
NUMBER OF SIMULTANEOUS VOIP CLIENTS
  • Up to 30
                                              NETWORK ARCHITECTURE
IP
• IPv4, IPv6, dual-stack
VLANS
• 802.1Q (1 per BSSID or dynamic, per user based on
RADIUS)
• Port-based
802.1X FOR WIRED PORTS
• Authenticator
• Supplicant
TUNNELING
• L2TP
                                    MULTIMEDIA AND QUALITY OF SERVICE
8022.11E/Wmm
  • Supported
SOFTWARE QUEUES
  • Per WLAN priority (2), Per Traffic type (4). per client
TRAFFIC CLASSIFICATION
  • Automatic, heurisitcs and TOS based or VLAN-defined
RATE LIMITING
  • Dynamic per-user or per-WLAN
                                                       MANAGEMENT
DEPLOYMENT OPTIONS
  • Standalone (individually managed)
  • Cantrally managed
                                                                WI-FI
STANDARDS
• IEEE 802.11a/b/g/n/ac
SUPPORTED DATA RATES
• 802.11ac: 29.3Mbps – 1733 Mbps (80MHz)
• 802.11n: 6.5Mbps – 216.7 Mbps(20MHz) 13.5 Mbps – 800Mbps (40MHz)
• 802.11a: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
• 802.11b: 11, 5.5, 2 and 1Mbps
• 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
RADIO CHAINS/ STREAMS
• 4×4:4
MIMO
• SU-MIMO — Up to 4 streams
• MU-MIMO — Up to 3 streams
CHANNELISATION
• 20 MHz, 40 MHz, and/or 80 MHz
FREQUENCY BANDS
• IEEE 802.11ac: 5.15 – 5.85GHz
• IEEE 802.11a/n: 5.15 – 5.85GHz
• IEEE 802.11b: 2.4 – 2.484GHz
BSSIDS
• Up to 16 (2.4GHz)
• Up to 16 (5GHz)
POWER SAVE
• Supported
CERTIFICATIONS
• WEEE/RoHS compliance
• EN 60601-1-2 Medical
• Wi-Fi Alliance certified
• UL 2043 plenum rated
SUBWAY AND RAILROAD CERTIFICATIONS
• EN50121-1 EMC
• EN50121-4 Immunity
• IEC 61373 Shock & Vibration

 

Reviews

There are no reviews yet.

Be the first to review “Ruckus Zoneflex T710 WiFi 5 | 802.11ac Wave 2 dual-band 360° outdoor wireless AP, 4×4:4 streams”

Your email address will not be published. Required fields are marked *